Toyota Avalon Key Replacement Austin TX - (512)523-4550

If you need a Toyota Avalon key replacement in Austin, Austin Car Key provides mobile service for lost keys, duplicate transponder keys, remote-head keys, Smart Keys, key programming, emergency-key cutting, ignition problems, broken-key extraction, and vehicle lockouts. The Toyota Avalon was sold in the United States from 1995 through 2022, and its key technology changed substantially over five generations. Early models use conventional physical keys, later Avalons added electronic engine immobilizers and transponder keys, and newer models use Toyota Smart Key technology with push-button start. Our automotive locksmith can identify the exact system and provide Toyota Avalon key replacement at your location in Austin.

Toyota Avalon Key Replacement Guide

The Toyota Avalon spans nearly three decades of Toyota key technology. The first generation began with conventional physical ignition keys. Electronic immobilizer and transponder technology appeared on later Avalons, followed by Toyota's Smart Key system with proximity entry and push-button start.

Because the Avalon changed key systems several times, the exact model year and ignition configuration should be identified before a replacement is ordered, cut, or programmed.

1995–1999 Toyota Avalon Keys

First-generation Avalon models use a conventional physical ignition key. Earlier vehicles rely primarily on the mechanical blade, while electronic theft-deterrent equipment became more relevant as Toyota moved toward immobilizer technology near the end of the 1990s.

Because these vehicles are now decades old, mechanical wear and previously replaced ignition or door-lock cylinders can be just as important as the original factory key specification.

There is no proximity Smart Key or push-button-start system on this generation.

2000–2004 Toyota Avalon Keys

The second-generation Avalon uses a conventional physical ignition key and Toyota's electronic engine-immobilizer technology on applicable vehicles.

An immobilizer-equipped Avalon requires a transponder key containing an electronic credential in addition to the correctly cut mechanical blade.

Remote Keyless Entry is a separate wireless function. Depending on the exact replacement configuration, remote controls can be incorporated into the key or handled separately.

2005–2012 Toyota Avalon Keys

The third-generation Avalon introduced Toyota Smart Key technology to the model, although the exact key and starting configuration can depend on model year and equipment.

Smart Key-equipped vehicles use an electronic proximity transmitter and push-button start instead of requiring the driver to insert a conventional ignition key for normal operation.

Where a physical-key configuration applies, the replacement requires the appropriate mechanical blade and electronic immobilizer credential.

2005–2012 Avalon Smart Key

A Smart Key-equipped Avalon detects an authorized electronic transmitter inside or near the vehicle and allows normal starting through the ENGINE START/STOP button.

The Smart Key fob also controls remote locking and unlocking and contains a removable mechanical emergency key for backup physical access.

The emergency blade and electronic Smart Key are separate parts of the replacement process. Cutting the blade does not program the Smart Key.

2013–2018 Toyota Avalon Keys

The fourth-generation Avalon uses Toyota Smart Key technology with push-button start rather than a conventional inserted ignition key for normal starting.

A replacement requires a compatible electronic Smart Key credential to be registered with the vehicle. The removable mechanical emergency blade should also be cut for backup door access.

Because similar Toyota Smart Keys can look almost identical while containing different electronics, exact application identification is important before programming.

2013–2018 Avalon Hybrid Keys

The Avalon Hybrid also uses an electronic Smart Key and push-button starting system.

Key replacement follows the same general principle of electronic Smart Key registration plus separate emergency-blade cutting, but a hybrid no-start should not automatically be diagnosed as a key problem.

The vehicle's 12-volt electrical system, hybrid control system, Smart Key detection, brake input, and other conditions can affect READY mode.

2019–2022 Toyota Avalon Keys

The fifth-generation 2019–2022 Avalon continues with Toyota Smart Key technology and push-button start.

Normal operation does not require inserting a mechanical ignition key. Instead, an authorized electronic transmitter must be detected before the vehicle permits starting.

A complete replacement includes the correct electronic Smart Key and, when needed, a properly cut emergency mechanical blade.

2019–2022 Avalon Hybrid Smart Key

The fifth-generation Avalon Hybrid also uses Smart Key technology.

Because hybrid vehicles enter READY mode rather than behaving exactly like a conventional gasoline vehicle during startup, a failure to become ready can have causes unrelated to the Smart Key.

Low 12-volt battery voltage is particularly important to check when multiple previously working Smart Keys suddenly appear not to function normally.

Toyota Avalon Transponder Key

On a physical-key Avalon equipped with an engine immobilizer, the key contains an electronic transponder credential.

The mechanical blade operates the lock and ignition cylinder, while the immobilizer verifies the electronic credential before allowing normal engine operation.

A correctly cut blade without the required authorized transponder is not a complete starting key on an immobilizer-equipped Avalon.

Toyota Avalon Remote-Head Key

Some physical-key Avalon applications combine the mechanical blade, immobilizer transponder, and Remote Keyless Entry buttons in one key assembly.

A remote-head key is not a separate type of engine-security technology. It is a package that can contain both the transponder and wireless remote electronics.

Engine authorization and remote-button operation should be tested separately after replacement.

Toyota Avalon Smart Key

A Smart Key-equipped Avalon uses an electronic proximity transmitter rather than an inserted key for normal starting.

The vehicle communicates with the registered Smart Key through its electronic access and immobilizer system. When the proper conditions are met, the driver can start the vehicle using the START/STOP button.

The replacement transmitter must match the exact Avalon application before electronic registration is attempted.

Avalon Smart Key Emergency Blade

Toyota Avalon Smart Keys contain a removable mechanical emergency blade.

The blade provides backup mechanical access if electronic unlocking is unavailable. It does not independently authorize push-button engine starting.

Emergency-blade cutting and Smart Key registration are therefore separate services.

Avalon Engine Immobilizer

The Avalon engine immobilizer provides electronic theft deterrence in addition to the vehicle's mechanical or electronic access system.

On physical-key models, authorization comes from the transponder credential in the key. On Smart Key models, the electronic proximity transmitter provides the required credential.

An immobilizer-related no-start does not automatically mean the ECU requires replacement. The key, reader or Smart Key antennas, security electronics, wiring, vehicle voltage, and communication between modules should be diagnosed first.

Similar-Looking Toyota Avalon Keys

Toyota used many similar-looking keys and Smart Key housings across Avalon, Camry, Lexus, and other models.

Visual similarity does not guarantee compatibility. Transponder technology, wireless electronics, button configuration, frequency, and vehicle application can differ even when two keys look almost identical.

The replacement should be identified for the exact Avalon before cutting or programming.

Used Toyota Avalon Keys

A used Avalon key or Smart Key should be checked carefully before service is attempted.

Exact application, electronic condition, previous registration, internal electronics, and applicable reuse requirements can determine whether a used key can be successfully registered to another vehicle.

Compatibility should preferably be established before cutting the mechanical blade.

Aftermarket Toyota Avalon Keys

An aftermarket replacement can be a practical option when its mechanical and electronic specifications match the exact Avalon.

Not every key advertised broadly for Toyota vehicles is compatible with every Avalon generation.

A customer-supplied key or Smart Key should therefore be verified before cutting or Toyota Avalon key programming is attempted.

Avalon Key & Ignition Wear

Physical-key Avalons can develop wear in both the blade and mechanical ignition cylinder.

If a less-used spare turns substantially better than the everyday key, blade wear becomes a strong possibility. A fresh key produced to proper specifications may restore smooth operation.

If several accurately cut keys bind in the same ignition, the cylinder becomes a stronger suspect. An ignition locksmith can inspect the mechanical system before unnecessary additional keys are made.

Previously Replaced Avalon Ignition or Locks

Older Avalons may have had an ignition cylinder or door lock replaced during a previous repair.

If replacement hardware was keyed differently, original factory mechanical-key information may no longer correspond to the components currently installed.

The actual ignition and locks should therefore be considered whenever a key produced from original information does not mechanically operate the vehicle as expected.

Lost Toyota Avalon Key Replacement

If you've lost your car keys and no working Toyota Avalon key remains, a replacement can still be made.

The process depends on the generation. An early mechanical-key Avalon primarily requires key origination. An immobilizer-equipped physical-key Avalon requires both mechanical cutting and electronic authorization. A Smart Key-equipped Avalon requires registration of a compatible electronic transmitter, with the emergency blade cut separately.

An all keys lost situation is different from adding another key while a recognized working key remains. The applicable immobilizer or Smart Key reset procedure depends on the exact year and security architecture.

Your vehicle's VIN can help identify the exact Avalon and applicable original key information. Proof of ownership and identification should be available before all-keys-lost service is performed.

If an older Avalon's ignition or locks were replaced previously, original mechanical information may no longer match the hardware currently installed.

If an electronic key or Smart Key was stolen, ask whether the missing credential can be removed from authorized memory when supported by the applicable vehicle procedure.

Duplicate & Spare Toyota Avalon Keys

If you still have a reliable working Avalon key, making a duplicate car key can help prevent a more complicated all-keys-lost situation.

On an older mechanical-key Avalon, a spare primarily requires accurate blade cutting. An immobilizer-equipped model also requires a compatible electronic transponder credential.

For a Smart Key-equipped Avalon, the replacement transmitter must be electronically registered, while its removable emergency blade is cut separately.

Before copying an older physical key, inspect its blade for wear. Directly tracing a heavily worn blade can reproduce years of wear instead of restoring the intended mechanical dimensions.

If a less-used spare works substantially better than the everyday key, producing the replacement to proper specifications can be preferable to directly copying the worn blade.

After replacement, test the new key independently for all applicable mechanical, starting, remote, passive-entry, and emergency-access functions.

Toyota Avalon Key Programming

Toyota Avalon key programming depends on the model year, security system, key type, and whether a recognized working key remains.

A simple mechanical key does not require electronic programming. A transponder-equipped Avalon requires immobilizer authorization, while a Smart Key-equipped vehicle requires electronic registration of the compatible proximity transmitter.

Avalon Transponder Key Programming

On an immobilizer-equipped physical-key Avalon, a compatible transponder credential must be recognized by the vehicle.

Mechanical cutting and electronic authorization are separate requirements. A blade can turn the ignition while an incorrect or unregistered transponder prevents normal engine operation.

After registration, the replacement should be tested independently by starting the vehicle.

Adding Another Avalon Key

When a recognized working key remains, another compatible electronic key can generally be added using the applicable Toyota registration procedure.

The replacement should first be verified for the exact model year and key system.

Keeping at least two reliable keys can reduce the inconvenience and complexity of a future all-keys-lost situation.

Avalon All Keys Lost Programming

If every authorized electronic key has been lost, the normal additional-key registration situation no longer applies.

The applicable immobilizer or Smart Key reset procedure must be used before replacement credentials can be established.

The exact procedure varies by generation, so the vehicle should be identified before service begins. Proof of ownership and identification should be available.

Avalon Smart Key Programming

A Smart Key-equipped Avalon requires registration of a compatible electronic transmitter.

The replacement should match the exact model year and Smart Key application. A Toyota fob that looks identical externally can contain different electronics and may not be compatible.

After programming, test push-button starting, passive entry, remote-button operation, and other applicable Smart Key functions.

Avalon Emergency Blade Cutting

The removable mechanical blade inside an Avalon Smart Key is cut separately from electronic Smart Key programming.

Online car key cutting or another mechanical cutting service can address the emergency blade, but cutting the blade does not register the electronic transmitter.

A complete replacement should provide both functions when required.

Avalon Lost-Key Erasure

If a transponder key or Smart Key was lost or stolen, ask whether the missing credential can be removed from authorized memory when supported by the applicable immobilizer or Smart Key procedure.

This is different from simply adding another replacement key.

Keys intended for continued use should be available during service when required.

Avalon Programming Failure

A replacement key that will not program does not automatically mean an expensive control module needs replacement.

An incorrect key application, incompatible transponder or Smart Key, damaged electronics, reader or antenna problem, low vehicle voltage, wiring fault, or communication issue can interfere with registration.

The replacement key and vehicle-side security system should be diagnosed before modules are replaced.

Toyota Avalon Key, Remote/Fob & Ignition/Starting Problems

A Toyota Avalon that will not unlock or start does not automatically need another key. Mechanical blade wear, ignition-cylinder problems, transponder recognition, Smart Key detection, remote electronics, vehicle voltage, wiring, and unrelated starting-system faults can produce similar symptoms.

Avalon Key Turns but Engine Will Not Start

On an immobilizer-equipped physical-key Avalon, the blade can turn the ignition while the vehicle does not recognize the electronic credential.

An incorrect, damaged, or unregistered transponder is one possibility, but vehicle voltage, immobilizer components, wiring, starter problems, fuel-system faults, and other conditions can also cause a no-start.

If another recognized key starts normally, the first key becomes a stronger suspect.

Avalon Security Indicator

The security indicator can provide useful information during immobilizer or Smart Key diagnosis.

Abnormal behavior can suggest that the expected electronic credential is not being recognized, but the indicator alone does not identify the failed component.

The key, security system, vehicle voltage, wiring, and related electronics should be considered together.

Avalon Remote Works but Engine Will Not Start

Remote-button operation and engine-start authorization are separate functions.

A remote can lock and unlock the doors while an immobilizer-related problem prevents normal starting. Vehicle battery, starter, fuel, engine-management, and other unrelated faults can also cause a no-start.

A functioning remote therefore does not prove that the complete starting system is operating normally.

Avalon Starts but Remote Does Not Work

If the Avalon starts normally but the remote buttons fail, the starting credential can still be functioning correctly.

A weak remote battery, worn buttons, damaged electronics, poor contacts, wireless-registration issue, or vehicle-side receiver problem can affect remote operation separately.

The remote portion should therefore be diagnosed independently.

Avalon Smart Key Is Not Detected

On a Smart Key-equipped Avalon, a weak fob battery can reduce detection range or interfere with normal proximity operation.

A damaged transmitter, radio interference, vehicle-side antenna or receiver problem, wiring issue, or low vehicle battery can create similar symptoms.

If another registered Smart Key works normally, the first transmitter becomes a stronger suspect.

Avalon Smart Key Battery Is Weak

A weak Smart Key battery can cause intermittent passive entry, reduced remote range, or difficulty with normal transmitter detection.

Replacing the correct fob battery does not normally erase a properly registered Smart Key.

If a fresh battery does not restore normal operation, the transmitter and vehicle-side Smart Key system should be checked.

Avalon Push-Button Start Does Not Work

If a Smart Key-equipped Avalon does not start when the START/STOP button is pressed, first consider whether an authorized key is being detected and whether the vehicle has adequate 12-volt power.

Brake-pedal input, Smart Key detection, immobilizer communication, vehicle voltage, starter controls, and unrelated vehicle faults can all affect starting.

A non-responsive start button does not automatically mean the Smart Key needs replacement.

Avalon Hybrid Will Not Enter READY Mode

On an Avalon Hybrid, failure to enter READY mode can initially appear to be a key problem.

Smart Key detection is one consideration, but low 12-volt battery voltage, brake-input problems, hybrid-system conditions, and other vehicle faults can produce similar symptoms.

If multiple registered Smart Keys behave the same way, a shared vehicle-side condition becomes more likely.

Avalon Key Is Hard to Insert

On a physical-key Avalon, a worn, bent, damaged, or poorly cut blade can become difficult to insert into the ignition.

Contamination or internal ignition-cylinder wear can create similar symptoms. If a less-used spare inserts normally, the everyday key becomes a stronger suspect.

If several accurately cut keys have the same problem, inspect the ignition cylinder.

Avalon Key Is Hard to Turn

If the physical key requires jiggling or excessive force, compare it with a less-used spare.

If the spare works significantly better, blade wear becomes more likely. If several correctly cut keys bind in the same way, the ignition cylinder becomes a stronger suspect.

Continuing to force a binding key can eventually bend or break the blade.

Avalon Key Is Stuck in the Ignition

A stuck physical key can involve blade wear, ignition-cylinder problems, steering pressure, transmission position, ignition components, or related interlocks.

Avoid excessive twisting or pulling because the blade can break inside the ignition.

If normal operating checks do not release the key, the ignition should be inspected.

Broken Toyota Avalon Key

A physical Avalon key can break because of blade wear, repeated bending, physical damage, or excessive force against a binding ignition.

If part of the blade remains inside the ignition or door lock, professional extraction can often remove it without unnecessarily replacing the complete cylinder.

If the key broke while turning, the ignition should also be inspected for mechanical binding before another key is used.

Spare Avalon Key Works Better

If a less-used spare turns smoothly while the everyday key binds, the primary blade may be worn.

A fresh key produced to proper specifications may restore normal operation without replacing the ignition cylinder.

If the spare also binds, the ignition becomes a stronger suspect.

Multiple Avalon Keys Are Hard to Turn

If several accurately cut keys bind in the same ignition, repeatedly making additional keys is unlikely to solve the underlying problem.

Internal cylinder wear, damaged components, contamination, or another mechanical condition becomes more likely.

Inspection can help prevent a key from eventually becoming stuck or breaking in the ignition.

Avalon Vehicle Battery Is Weak

Low 12-volt vehicle voltage can cause starting and electronic-security symptoms that initially appear to be key related.

This is particularly important on Smart Key and hybrid Avalons because their electronic access and starting systems depend on adequate vehicle power.

If several previously working keys suddenly fail at the same time, checking the vehicle battery and electrical condition is an important diagnostic step.

Toyota Avalon Lockout Service

If your Toyota Avalon key is locked inside the vehicle, replacement may not be necessary. Austin Car Key provides car door unlocking to regain access and retrieve the existing key.

Professional vehicle entry helps avoid unnecessary damage to the glass, paint, weather stripping, door trim, mechanical locks, and electronic locking components.

A lockout should be distinguished from an all keys lost situation. If a functioning Avalon key or Smart Key is simply inaccessible inside the vehicle, retrieving it can avoid unnecessary cutting and programming.

If the recovered key is your only reliable working key, making a spare afterward can reduce the risk of a more complicated future replacement.

Dealer vs. Locksmith

A Toyota dealer can provide OEM replacement keys, Smart Keys, and related service for the Avalon. Depending on the model year and situation, dealer service may require vehicle transport or additional ownership-verification procedures.

A properly equipped mobile automotive locksmith may be able to originate lost Avalon keys, duplicate transponder keys, register compatible Smart Keys, cut emergency blades, service remote functions, extract broken blades, diagnose mechanical ignition problems, and unlock the vehicle at its location.

Correct identification is important because the Avalon spans mechanical-key, transponder-key, remote-head, and Smart Key generations. Similar-looking Toyota keys should not automatically be assumed interchangeable.

Mobile service can avoid vehicle transport when the required cutting, programming, reset, and diagnostic work can be completed at the vehicle.

For information on locating a Toyota service facility or parts source, use our find a dealer resource.

Toyota Avalon Key Replacement Cost in Austin

The cost of Toyota Avalon key replacement depends on the model year and key technology. An early mechanical key is substantially different from an immobilizer transponder key or a proximity Smart Key.

All prices are estimates. Final pricing depends on the exact model year and key system, whether a recognized key remains, replacement-key electronics, programming or reset requirements, mechanical cutting, parts availability, and the condition of the ignition and locks. A technician can provide a final quote before beginning service.

Common Questions & Answers

What years was the Toyota Avalon sold in the United States?

The Toyota Avalon was sold in the United States from the 1995 through 2022 model years.

What type of key does a Toyota Avalon use?

It depends on the model year. Early Avalons use conventional physical keys, later models use electronic transponder keys, and newer generations use Toyota Smart Keys with push-button start.

Does the Toyota Avalon have a transponder key?

Immobilizer-equipped physical-key Avalons use an electronic transponder credential in addition to the mechanical blade. The exact application should be verified by model year and vehicle configuration.

Does the Toyota Avalon have push-button start?

Later Avalon generations use Toyota Smart Key technology with push-button start. Earlier Avalons use a conventional physical ignition key.

Does the Toyota Avalon use a Smart Key?

Smart Key technology appeared during the third-generation Avalon era and became the normal key architecture on later generations. The exact equipment should be identified for the specific model year.

Does an Avalon Smart Key have a mechanical key?

Yes. Toyota Avalon Smart Keys contain a removable emergency mechanical blade for backup physical access.

Can the Avalon emergency key start the car?

Not by itself on a push-button-start Avalon. The mechanical emergency blade provides backup physical access, while engine starting requires an authorized electronic Smart Key credential.

Does an Avalon transponder key need programming?

Yes. On an immobilizer-equipped physical-key Avalon, the electronic credential must be recognized by the vehicle's security system.

Will a plain metal key start an immobilizer-equipped Avalon?

No. A plain mechanical copy may operate the ignition cylinder, but an immobilizer-equipped vehicle also requires an authorized electronic credential for normal starting.

Can you make a Toyota Avalon key if all keys are lost?

Yes. The process depends on the generation and can involve mechanical key origination, an immobilizer reset, or Smart Key registration.

Can a lost Toyota Avalon key be erased?

On an electronic-key Avalon, ask whether the missing credential can be removed from authorized memory when supported by the applicable immobilizer or Smart Key procedure.

Can a Toyota Avalon key be made from the VIN?

The VIN can help identify the exact vehicle and applicable original key information. If the ignition or locks were replaced previously, the installed hardware may no longer match the original mechanical configuration.

Can I order a Toyota Avalon key cut online?

Online car key cutting can address the mechanical blade when the correct information is available. Transponder or Smart Key authorization is a separate electronic process.

Can I use a used Toyota Avalon Smart Key?

A used Smart Key should be checked for exact application, electronic condition, previous registration, and applicable reuse requirements before service is attempted.

Can I use an aftermarket Toyota Avalon key?

An aftermarket replacement can be an option when its mechanical and electronic specifications match the exact Avalon. Similar appearance alone does not establish compatibility.

Is an Avalon remote-head key the same as a transponder key?

A remote-head key can contain the immobilizer transponder and Remote Keyless Entry electronics in the same housing. The two electronic functions remain distinct.

Why does my Avalon key turn but the engine will not start?

On an immobilizer-equipped physical-key Avalon, the electronic credential may not be recognized. Vehicle battery, starter, fuel, wiring, security-system components, and other faults can also cause a no-start.

Why does my Avalon remote work but the engine will not start?

Remote-button operation and engine authorization are separate functions. A working remote does not prove that the immobilizer or complete starting system is functioning normally.

Why does my Avalon start but the remote buttons do not work?

A weak remote battery, worn buttons, poor contacts, damaged transmitter electronics, wireless-registration issue, or vehicle-side receiver problem can affect remote operation while the starting credential remains functional.

Will changing my Avalon key-fob battery erase its programming?

Normally, no. Replacing the remote or Smart Key battery does not erase a properly registered electronic credential.

Why is my Toyota Avalon Smart Key not detected?

A weak fob battery, damaged transmitter, radio interference, low vehicle voltage, antenna or receiver problem, wiring issue, or another Smart Key system fault can interfere with detection.

Why won't my Avalon start after replacing the fob battery?

Check that the correct battery is installed with proper orientation and that its contacts are making good connection. If the problem continues, the Smart Key, vehicle's 12-volt battery, antennas, receiver, or another starting-system component may require diagnosis.

Why won't my Avalon Hybrid enter READY mode?

Smart Key detection is one possibility, but low 12-volt battery voltage, brake-input problems, hybrid-system conditions, and other vehicle faults can also prevent READY mode.

Why is my Toyota Avalon key hard to turn?

The blade may be worn or damaged, or the ignition cylinder may have mechanical wear. If a less-used spare works better, the everyday key becomes a stronger suspect. If several accurately cut keys bind, inspect the ignition cylinder.

Why is my Avalon key stuck in the ignition?

Blade wear, ignition-cylinder problems, steering pressure, transmission position, or related interlocks can interfere with key removal. Avoid excessive force because the blade can break inside the cylinder.

What if my Toyota Avalon ignition was replaced?

A replacement ignition may have been keyed differently from the original locks. Original factory mechanical-key information may therefore no longer match the ignition currently installed.

Can you remove a broken key from a Toyota Avalon ignition?

In many cases, a broken blade can be professionally extracted without replacing the complete ignition cylinder. If the key broke while turning, the ignition should also be inspected for binding or internal wear.

Can you unlock my Toyota Avalon if the key is inside?

Yes. If a functioning key is simply locked inside the vehicle, professional vehicle unlocking can regain access without unnecessarily making and programming another key.

Toyota Avalon Key Replacement in Austin

The 1995–2022 Toyota Avalon progressed from conventional mechanical ignition keys to electronic transponder keys and eventually Toyota Smart Key technology with push-button start. The correct replacement process therefore depends heavily on the model year and security system.

Older physical-key vehicles require attention to both mechanical wear and immobilizer requirements, while newer Smart Key-equipped Avalons require compatible electronic transmitters and separate emergency-blade cutting. Hybrid models also require careful diagnosis because 12-volt and hybrid-system problems can sometimes resemble a key or Smart Key failure.

If you still have a reliable working Avalon key, making a spare now can help prevent a more complicated all keys lost situation. If every key is already missing, a replacement can still be originated and the applicable immobilizer or Smart Key procedure performed.

For Toyota Avalon key replacement, duplicate transponder keys, Smart Key replacement, lost-key service, key programming, emergency-blade cutting, ignition problems, broken-key extraction, or vehicle unlocking in Austin, contact Austin Car Key for mobile service at your location.

Service Area